credit cards and PayPal accepted
Take time to pay - available at checkoutseal kits for Crosman model 140. Includes everything you need to reseal your airgun plus a tube of oil and an exploded drawing.
- Seals and parts
- Tube of airgun oil
- Exploded drawing
Beware of lesser quality seal kits! Our seal kits are guaranteed to work. If you cannot repair your airgun yourself you can send it to our Authorized airgun repair center for repair, and we’ll deduct the cost of the seal kit you purchased from the total on your repair. Proof of purchase is required, so keep your order number handy.
This is not a cheap “O-Ring” kit. It’s a seal / re-seal kit made with parts closely resembling the originals needed to actually reseal your airgun to restore power. If your airgun leaks CO2, air, or isn’t shooting as hard as it should our reseal kits will get them shooting good again when properly installed.
More in Airgun Parts
Saber Tactical, FX Panthera Front Bottle Adapter
$30.00
Saber Tactical, FX Panthera Front Bottle Adapter This adapter will allow you to mount a bottle on the front of our FX Panthera!
Hot
Max-Flow System for Benjamin Discovery
$65.00
Max-Flow System for Benjamin Discovery The complete Max-Flow Bulk-Fill system with filling head for use with the Benjamin Discovery air rifle. Max-Flow Valve for Benjamin Discovery The Max-Flow’s larger valve capacity increases velocity / performance over the stock Discovery valve,...
Custom Order Seal Kits
$38.75
Pellet & BB only. No Airsoft Please [CLICK HERE] to view airguns we DO NOT have kits for
Crosman 760 (manual cocking) Seal Kits
$38.75
Includes everything you need to reseal your Crosman 760 (manual cocking) Air Guns
More in Airgun Accessories
Hawke Bubble Level for Weaver Rails
$21.99
MSRP: $19.99 You save $2 Includes limited warranty (factory)
Hawke Tilt Bipod 6-9″
$95.99
Height adjustable spring loaded legs Easily attaches to a swivel stud Works with a sling attached Lightweight high grade alloy with black anodizing Designed to help improve accuracy and stability Spring loaded adjustable legs: 6-9″ / 15-23cm 13.4oz /...
DonnyFL Tanto Moderator .25/.30
$99.00
DonnyFL Tanto Moderator Features: Available in .25/.30 (larger size recommended, even if using small caliber) Mono-core design Comes pre-wrapped in felt Machined grooves on the outside for easy handling Tanto is 1.22″ wide and 5″ long Comes with protective red...
EDgun Leshiy 2 300cc Carbon Fiber 300BAR Bottle
$300.00
EDgun Leshiy 2 Air tank – 300 bar carbon fiber Edgun Leshiy 2 carbon fiber 300 cc tank is custom designed for the Leshiy 2 to provide the maximum shot count while maintaining the gun’s exceptional balance. M18 thread 300...
Air Venturi Rat on a Stick Shoot To Reset Airgun Target
$24.99
Enjoy target airgun shooting with no interruptions with this shoot-to-reset rat silhouette target. Just shoot the reset target to reset the adjustable kill zone target. Intended for use with .177 or .22 caliber lead pellets only. Features: Rat silhouette Long...
More in Airgun Ammo
JSB Exact King Heavy MKII .25 cal, 33.95gr, Domed, 300ct
$24.99
.25 caliber | 6.35 mm 33.95gr | 2.20g Domed 300 pcs Made in Czech Republic
Buy 4 Get 5 tins of JSB Exact Monster Pellets 177 13.43 gr 400 ct
$79.96
5 tins of JSB Exact Monster Pellets 177 13.43 gr 400 ct .177 caliber | 4.5 mm 13.43 gr | 0.870 g 5 x 400 pcs Domed shape Made in the Czech Republic by JSB
Buy 4 Get 5 tins of JSB Match Diabolo Exact, .35 Cal, 81.02 Grains, Domed, 100ct
$75.96
5 tins of JSB Match Diabolo Exact, .35 Cal, 81.02 Grains, Domed, 100ct 9mm 81.02 grains Domed 5 x 100 pellets
JSB Exact .30 Diabolo Pellets | .30 cal, 50.15 gr, Domed, 150 ct
$19.99
.30 caliber | 7.62 mm 50.15gr | 3.25g Domed 150 pcs M 27/12 Made in Czech Republic
Buy 4 Get 5 tins of JSB Exact .30 Diabolo Pellets | .30 cal, 44.75 gr, 150 ct
$79.96
5 tins of JSB Exact .30 Diabolo Pellets | .30 cal, 44.75 gr, 150 ct .30 caliber | 7.62 mm 44.75gr | 2.90g Domed 150 pcs M 27/12 Made in Czech Republic
JSB Exact 177 cal, 13.43 gr, Redesigned Monster 400ct
$19.99
Redesigned .177 caliber | 4.5 mm 13.43 gr | 0.870 g 400 pcs Domed shape Made in the Czech Republic by JSB
RANDY E GRAY –
How do I get the pump cup off of a Crosman 140? The brass sleeve that holds the cup on seems to be pressed onto the aluminum shaft
Donnie R –
Hello,
Cut all of the old pump cup off with a knife.
Then put the rod in a vice.
Spray some WD40 or other penetrating oil at the junction of the brass piece and the rod.
Make SURE you clean it all off afterwards.
Use some pliers or vice-grips or something to GENTLY hold the brass piece and move it side to side until it can be slid out.
I’d use some leather or something between the pliers and the brass piece so you don’t jack it up.
When it’s off, clean everything.
You’ll have to press the brass piece back in when you’re done.
-Donnie
Jim Sharp –
I just purchased a crossman 140- pellet rifle and would like to obtain parts to make it work.
Donnie R –
Hello,
Our seal kit will work great in your 140.