credit cards and PayPal accepted
Take time to pay - available at checkoutseal kits for Crosman model 140. Includes everything you need to reseal your airgun plus a tube of oil and an exploded drawing.
- Seals and parts
- Tube of airgun oil
- Exploded drawing
Beware of lesser quality seal kits! Our seal kits are guaranteed to work. If you cannot repair your airgun yourself you can send it to our Authorized airgun repair center for repair, and we’ll deduct the cost of the seal kit you purchased from the total on your repair. Proof of purchase is required, so keep your order number handy.
This is not a cheap “O-Ring” kit. It’s a seal / re-seal kit made with parts closely resembling the originals needed to actually reseal your airgun to restore power. If your airgun leaks CO2, air, or isn’t shooting as hard as it should our reseal kits will get them shooting good again when properly installed.
More in Airgun Parts
Max-Flow Valve for Benjamin Discovery
$45.95
Max-Flow Valve for Benjamin Discovery The Max-Flow valve increases performance over the stock valve. Can be used with C02 or high pressure air. The angled transfer port directs air / C02 pressure more directly to the pellet chamber. Larger valve...
Crosman 150 & 157 Seal Kits
$38.75
Includes everything you need to reseal your Crosman 150 & 157 Air Guns
Crosman 100, 101, 102, 103, and 104 Seal Kits
$38.75 – $57.70
You may need a T1 / T5 Tool for Crosman to install this kit. Select options below.
More in Airgun Accessories
Coupler
$5.00
Coupler, 1/8″ NPT x 1/8″ NPT For filling original Crosman 10 oz C02 tanks with the multi-tip adapter
Hawke Bubble Level for Weaver Rails
$21.99
MSRP: $19.99 You save $2 Includes limited warranty (factory)
Saber Tactical Dreamline Bottle Chassis ST0015
$575.00
Saber Tactical Dreamline Bottle Chassis ST0015 Arca Swiss rail with a short picatinny rail in front. T slot rail runs along both sides of the Arca Swiss rail to attach any m lok accessories Foldable stock magnetically secured Built...
Air Venturi Rat on a Stick Shoot To Reset Airgun Target
$24.99
Enjoy target airgun shooting with no interruptions with this shoot-to-reset rat silhouette target. Just shoot the reset target to reset the adjustable kill zone target. Intended for use with .177 or .22 caliber lead pellets only. Features: Rat silhouette Long...
More in Airgun Ammo
Buy 4 Get 5 tins of Predator Polymag Premium Hunting Pellets | .22 cal, 16gr, Pointed, 200ct
$91.96
5 tins of Predator Polymag Premium Hunting Pellets | .22 cal, 16gr, Pointed, 200ct Manufacturer’s Description “Proven to be the best hunting pellet made!” “Superior accuracy and take down punch”. The hollow head design with sharp polymer tip offers match...
FX Air Rifle Pellets .177 Cal, 10.3 Grains, Domed, 500ct., 4.52mm
$17.99
.177 cal 10.3 grains 4.52mm Head size Domed 500ct Perfect for your high powered .177 caliber air rifles. At a stout 10.3 grains, the FX pellets blend quality and consistency to create the downrange accuracy you’ve been longing for! ...
H&N Sport Baracuda Hunter Extreme Pellets .177 cal, 9.57gr, 400 pcs
$15.99
Hollow Point expanding design .177 caliber 9.57 grains 4.50 head size 400 pieces
Buy 4 Get 5 tins of JSB Exact .30 Diabolo Pellets | .30 cal, 50.15 gr, Domed, 150 ct
$79.96
5 tins of JSB Exact .30 Diabolo Pellets | .30 cal, 50.15 gr, Domed, 150 ct .30 caliber | 7.62 mm 50.15gr | 3.25g Domed 150 pcs M 27/12 Made in Czech Republic
Buy 4 Get 5 tins of JSB Exact 177 cal, 13.43 gr, Redesigned Monster 400ct
$79.96
5 tins of JSB Exact 177 cal, 13.43 gr, Redesigned Monster 400ct Redesigned .177 caliber | 4.5 mm 13.43 gr | 0.870 g 5 x 400 pcs Domed shape Made in the Czech Republic by JSB
Buy 4 Get 5 tins of Predator Polymag Premium Hunting Pellets | .25 cal, 26gr, 150 ct
$91.96
5 tins of Predator Polymag Premium Hunting Pellets | .25 cal, 26gr, 150 ct The hollow head design with sharp polymer tip offers match grade accuracy with incomparable penetration and expansion. Hollowpoint with pointed polymer tip .25 caliber 26 grains...
RANDY E GRAY –
How do I get the pump cup off of a Crosman 140? The brass sleeve that holds the cup on seems to be pressed onto the aluminum shaft
Donnie R –
Hello,
Cut all of the old pump cup off with a knife.
Then put the rod in a vice.
Spray some WD40 or other penetrating oil at the junction of the brass piece and the rod.
Make SURE you clean it all off afterwards.
Use some pliers or vice-grips or something to GENTLY hold the brass piece and move it side to side until it can be slid out.
I’d use some leather or something between the pliers and the brass piece so you don’t jack it up.
When it’s off, clean everything.
You’ll have to press the brass piece back in when you’re done.
-Donnie
Jim Sharp –
I just purchased a crossman 140- pellet rifle and would like to obtain parts to make it work.
Donnie R –
Hello,
Our seal kit will work great in your 140.